Propellers, stern drives, trim and shaft lines. Not harmful to the environment.
Without biocides. Clears vegetation when moving. Long-term protection.
When used for the first time: Apply 2-3 coats on SEAJET EPOXY BONDING PRIMER.
Applications on existing SEAJET SPEED UNDERWATER COATING: Wash and degrease with
SEAJET BOATWASH. Carefully repair only the damaged areas using P -100 sandpaper. Clean
the abraded area and touch up with SEAJET EPOXY BONDING PRIMER. Then, apply 2 coats of SEAJET
SPEED UNDERWATER COATING. SEAJET SPEED UNDERWATER COATING works like a charm
different than an antifouling, thanks to the special properties of the film, which limits the adhesion of
encrustations. SEAJET SPEED UNDERWATER COATING is not compatible with other coatings. For the
Removing any vegetation growth a light pressure washing, or scrubbing is recommended
with hose and sponge. This will avoid damaging the upholstery and leave it looking like new.
Caution: Due to the presence of silicon compounds, avoid contamination of other areas
masking them carefully before application. Brushes and rollers should be thrown away after use. TO
Due to the limited shelf life, once opened, close the tin tightly and store it upside down
below.
Performance scale from 10 to 1': 8
Number of hands per season: 2
Depending on the application it can last up to: Three seasons
Suitable for boats and yachts: Yes, up to 30 knots
Suitable for aluminium: Yes
Suitable for fibreglass, wood and iron: Yes
Suitable for fresh water: Yes
Suitable for dry mooring: Yes
Yield: 0.7m^2/box
Packaging: Set in box
